Workplace Safety: The Dos and Don’ts around a Conveyor System

Conveyor systems are essential in several industries. However, they’re also a source of accidents, a few of which are catastrophic. This means that safety around conveyor systems is vital if you are to fight these incidents. This guide will take a look at the dos and don’ts which will keep the conveyors running while also having everybody from the workplace safe.

Do Keep Clothing Away

It’s very simple for unfastened pieces of clothes to become trapped inside the conveyor roller. You need to let only specialised personnel handle the system. Other than clothing, ensure that everyone with long hair has it neatly held in place. Ultimately, have jewellery such as rings, necklaces and watches aside when working.

Don’t Ride The Conveyor

Riding the conveyor line might be entertaining but it’s very unsafe. Actually, don’t climb, sit or walk on this system at any moment. Remember that when these conveyors were being built, they were in no way built with people in mind and thus were by no means created to deal with the human weight. As a result, it is very easy for belts to go out of track.

Do Make Sure A Clear Start-up

Numerous industrial mishaps that occur close to a conveyor system could be connected to its launch. Even though many of them sound an alarm prior to coming on, it really is imperative that you stay away from the area. As a supervisor, make sure that everyone inside the plant understands the meaning of the alarm to help keep accidental injuries at bay.

Do Not Service The Conveyor Before Disconnecting Power

Any maintenance activities need to wait for the unit to be turned off from power. Regardless of whether your conveyor depends on electricity, hydraulic or air, ensure that the cut-off is in place to stop any person from inadvertently turning it back on. You’ll find several lockout systems which you can employ to handle this.

Do Master The On/off Controls

Anyone who is working close to this system should know where the emergency on / off controls are located. These controls also need to be clearly marked to make it easy for any person to easily see them and use them when the need arises.

Do Not Modify Controls

It’s recommended that only certified personnel be permitted to make any modification around the controls. It really is also important that you keep an eye on them so that you are able to identify misuse or any slight modifications by your employees. Even though some tasks could require that you modify these controls, it’s nevertheless not advisable to do so because these controls are a part of a bigger system and doing modifications can result in other unexpected problems.

There are a few Roller Conveyors sites in England, if you are looking for more information or perhaps pricing this page is a great place to start www.conveyorrollers.co.uk